[. . . ] Connect a CAT-5 cable from a switch to the TPE-101I's Data In port. 3. TEW-434APB) to the TPE-101I's PoE Out port 3 English Using the TPE-103I with a non-PoE device Note: Take note of the output power for your non-PoE device. The TPE-103I only supports non-PoE devices with an output power of 5V, 7. 5V, 9V or 12V. 1. [. . . ] Connect an Ethernet cable from a PoE switch to the PoE In port on the TPE-103I. 3. Connect the Ethernet cable from the Data-Out port on the TPE-103I to the non-PoE device's LAN port (e. g. TEW-450APB) and to the TPE-103I. Your installation is now complete. Register Your Product To ensure the highest level of customer service and support, please take a moment to register your product Online at: www. trendnet. com/register Thank you for choosing TRENDnet 4 English Technical Specifications IEEE 802. 3 10BASE-T IEEE 802. 3u 100BASE-TX IEEE 802. 3af Power Over Ethernet (PoE) Data: 1, 2, 3, 6 Power: 4, 5 (V+), 7, 8 (V-) TPE-101I: 1 Data In, 1 PoE Out TPE-103I: 1 Data Out, 1 PoE In 10/20Mbps for half/full-duplex 100/200Mbps for half/full-duplex POWER TPE-103I: DC OUT (5V, 7. 5V, 9V, 12V) 10BASE-T: UTP/STP Cat. 5, 5e, 6 TPE-101I: 115 x 57 x 35mm (4. 5 x 2. 2 x 1. 4 in. ) TPE-103I: 80 x 54 x 24mm (3. 2 x 2. 13. 35 x 0. 9 in. ) TPE-101I: 48V DC, 0. 3A TPE-103I: DC Output 5V , 7. 5V, 9V, or 12V TPE-101I: 15. 5 Watts (max) TPE-103I: 10 Watts (max) 0°C ~ 45°C (32°F ~ 104°F) -40°C ~ 70°C (14°F ~ 158°F) 10 ~ 90%, non-condensing FCC, CE Applicable Standards Ethernet Pin Usage Fixed Ports Speed LED Indicator Switches Cable Dimensions Power Power Consumption Operating Temperature Storage Temperature Humidity Certificates 5 Troubleshooting Q1: Why is the POWER LED off on the TPE-101I?Second, make sure that the PoE device is connected properly to the TPE-101I. A2: First, make sure that the TPE-103I is connected properly to the PoE switch or TPE-101I (See 3. Hardware Installation). A3: Any PoE device that follows the IEEE 802. 3af standard will work with TPE-101I. TRENDNET SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY CUSTOMER'S OR ANY THIRD PERSON'S MISUSE, NEGLECT, IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED ATTEMPTS TO REPAIR OR MODIFY, OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, OR OTHER HAZARD. LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW TRENDNET ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATE, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF THE POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE PAID, AT TRENDNET'S OPTION. THIS DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE. Governing Law: This Limited Warranty shall be governed by the laws of the state of California. Note: AC/DC Power Adapter, Cooling Fan, Cables and Power Supply carry a 1-Year Warranty 8 Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. Including interference that may cause undesired operation. Waste electrical and electronic products must not be disposed of with household waste. [. . . ] Operation is subject to the following two conditions: (1) This device may not cause harmful interference. Including interference that may cause undesired operation. Waste electrical and electronic products must not be disposed of with household waste. Check with you Local Authority or Retailer for recycling advice. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. [. . . ]